The REDARC range of Electric Trailer Brake Controllers put you in charge… not your trailer. All REDARC brake controllers are capable of operating up to 3 axle trailer brakes, and all operate with a progressive brake application to the level set by the user.

The Redarc range of electric trailer brake controllers provide an easy to operate method of controlling electric brakes on a trailer, camper-trailer, boat trailer or caravan.

• A GREEN light from the LED indicator means that a trailer with electric brakes is plugged in.
• Application of the brakes from either the foot brake or the manual button on the controller will change the LED to a shade of RED.
• The shade of RED indicates to what level the brakes are applied.
• The adjustment knob will set the level of braking, for both the manual button and the foot brake.

Note: When a trailer is not connected the LED indicator will still glow RED when the brakes are applied.

The Remote Mount model comes with the LED and controls remote from the unit. This allows mounting of the controls up to 500mm away from the main unit. The controls are small enough to be mounted in the dash through a standard push-out switch panel. The main unit can be mounted out of sight, and the controls will have minimal visual impact on the vehicle. The braking gain adjustment knob and the manual override pushbutton are the same control, which allows the operator to adjust the braking level whilst operating the manual override function. 

For 24V vehicles with 12V trailer brakes, we have an adaptor to enable safe use of the brake controller.

View PDF of complete product details

Discussion